(also: differential gear, rear differential, rear final drive)
General
The differential in the T4 Syncro connects the rear wheels to the drive train and compensates for speed differences between the rear wheels. Torque is transmitted via a viscous coupling located between the propshaft and the rear differential. The redirection of drive from longitudinal to transverse within the rear differential is achieved using hypoid gears. This refers to bevel gear sets whose axes do not intersect, meaning they feature an axle offset. This design allows the spiral teeth to be shaped in such a way that very high torque can be transmitted within a relatively compact space. In addition to their compact construction, hypoid gears are primarily distinguished by their exceptionally smooth and quiet running. The spiral gearing, combined with the offset between the drive pinion and crown wheel, means that power is transmitted through sliding-screw action rather than pure rolling contact. The tooth flanks slide against one another, placing high demands on the gear oil and requiring precise gear mesh alignment to ensure a long service life. The final drive gearset in the T4 Syncro rear differential consists of the drive pinion—which forms a single unit with the input shaft that also carries the viscous coupling—and the crown wheel, which is press-fitted onto the main shaft.
Like the drive train of the T3 Syncro, the rear differential for the T4 was developed and built by SDP (Steyr Daimler Puch) in Austria. In total, there were 20 different rear differentials used in the T4 Syncro. These are most easily identified by their transmission code letters, which are engraved on the machined flat surface between the filler plug and the pinion housing.
If the code letters are no longer legible—due to corrosion, for instance—the differential can be identified by its visible technical characteristics (gear ratio, diff lock, freewheel lock, housing material, flange diameter). While the fundamental design of all rear differentials is identical, various modifications were introduced across the production years, categorising them into five distinct generations. Each generation comprises four final drives, distinguished respectively by the presence or absence of a diff lock and a freewheel. The following five generations of rear differentials exist:
| Generation | Code letters | Model series |
|---|---|---|
| Generation 1 | ARG, ARH, AYA, AYB | 02D |
| Generation 2 | CJK, CJL, CJM, CJN | 02D |
| Generation 3 | DFA, DFB, DFC, DFE | 02D |
| Generation 4 | CZV, CNC, CZU, CZT | 02D |
| Generation 5 | DUB, DTY, DUA, DTZ | 02G |
Overview of rear differentials in the T4 Syncro
The table below lists all differentials fitted to the T4 Syncro along with their respective technical specifications. This information was carefully compiled and measured by hand; however, official VW documentation is itself partly contradictory in places, and the code letters on steel housings in particular are often barely legible today. All information is therefore provided without guarantee, and suggestions for corrections or improvements are always welcome.
First-generation differentials (ARG, ARH, AYA, and AYB) feature the 13:21 gear ratio, which was replaced in March 1994 by the 17:27 ratio that remained in production until the end of the model run. This second generation (CJK, CJL, CJM, and CJN) was fitted until the end of 1995. With the major product update in 1996, the 108 mm flanged shafts were replaced by 100 mm flanged shafts, which also necessitated new driveshafts on the rear axle.
The ratios 13:21 and 17:27 refer to the tooth count of the drive pinion and crown wheel. For the 17:27 ratio, the small pinion has 17 teeth and the large crown wheel has 27.
The dimensions 100 mm and 108 mm refer to the internal diameter of the flanged shafts or the external diameter of the inner CV joints on the rear driveshafts.
For a brief transitional period (until October 1996), the third-generation differentials (DFA, DFB, DFC, and DFE) were still available with a steel housing before an aluminium alloy was adopted exclusively. With the introduction of the 100 mm flanged shafts, the overall width of the final drives (measured across the outer edges of the flanged shafts) was reduced by 10 mm from 435 mm to 425 mm. This was due to more compact flanges. The fourth generation (CZV, CNC, CZU, and CZT) was fitted to petrol and naturally aspirated diesel models until the end of production. Generations 1 to 4 belong to the 02D gearbox family.


With the launch of the TDI Syncro from 1998 onwards, the 02G series was introduced, bringing the fifth generation of final drives (DUB, DTY, DUA, and DTZ). These differentials were fitted to turbo-diesel Syncros until the end of production. The fundamental difference lies in the larger final drive gearset, engineered to withstand the increased torque of the TDI engines. To accommodate this, the final drive casing had to be enlarged, making the differential 20 mm wider on the left-hand side.



Diff lock
Every generation of the rear differential was optionally available with a mechanical diff lock. This prevents speed differentiation by the differential and ensures equal torque transmission to both rear wheels. Especially on vehicles like the T4, which has relatively limited suspension articulation by design, a differential lock is invaluable whenever driving off tarmac. It is vacuum-operated via a two-way pull valve. A vacuum actuator is mounted on the axle casing; when activated, it moves a selector fork, which in turn axially shifts an internally splined sliding sleeve. In its disengaged rest position, the sliding sleeve sits on the left flanged shaft. When the lock is engaged, the selector fork slides it towards the centre of the differential, creating a positive interlock with the splines of the main shaft. This locks both flanged shafts together, preventing any relative rotation—the rear axle is fully locked.




On 02D series final drives, the actuator is mounted on a bracket plate directly on the left-hand side cover. For 02G drives, the actuator is fitted to a plate on the upper right area of the casing and linked to the selector fork via a pushrod.

Unfortunately, the actuator is very vulnerable and over time is usually destroyed by corrosion on the mounting plate (expanding rust fractures the plastic housing). The actuator bears the spare part number VW 02D525641A and has been discontinued without replacement for years. The topic surrounding this actuator is quite complex and will soon be addressed in a dedicated article. You can already find a blog post on the vacuum actuator.
We have made every effort to supply spare parts for a range of typical diff lock actuation faults. From mounting plates and rubber grommets through to fully billet-machined aluminium actuators, everything can be found in our shop.
Spare parts for the rear differential
-
Clevis joint 02D differential with diff lock12,90 €incl. VAT
plus shipping costs
Delivery time: 2–4 working days
-
Freewheel Lock Actuator Mounting Kit18,90 €incl. VAT
plus shipping costs
Delivery time: 2–4 working days
-
Diff lock actuator bracket 02D29,90 €incl. VAT
plus shipping costs
Delivery time: 2–4 working days
-
Bracket diff lock actuator 02G34,90 €incl. VAT
plus shipping costs
Delivery time: 2–4 working days
-
Selector rod 02G differential with diff lock34,90 €incl. VAT
plus shipping costs
Delivery time: 2–4 working days
Freewheel
The freewheel in the Syncro drive train is fitted as standard to all T4 Syncros equipped with ABS. As a passive component, the viscous coupling cannot be integrated into the anti-lock braking system’s electronic control loop, making it necessary to decouple the rear axle on overrun on ABS-equipped vehicles. The mechanical freewheel allows the rear wheels to rotate faster than the front wheels without causing wind-up in the drive train. This makes it possible to brake all four wheels independently, ensuring seamless ABS operation while preventing braking torque from being transferred to the rear axle via the viscous coupling. The freewheel connects the main shaft to the differential and consists of sprags held between two brass rings.
To maintain four-wheel drive functionality in reverse gear as well, the freewheel must be locked. This is achieved via a sliding sleeve that is pushed onto dog teeth by an electro-pneumatic actuator. This creates a positive mechanical interlock between the main shaft and the differential, overriding the freewheel. The entire mechanical assembly of the freewheel lock is relatively simple in design, but prone to failure.


A serious issue is the connection between the actuator and the selector lever. Here, the selector rod is secured to the linkage pivot—which sits loosely on a pivot bolt—using a plastic expanding pin. Axial retention relies solely on the selector rod being located in the actuator. Over the years, thermal ageing in the gear oil causes the plastic expanding rivet to become brittle, and it can eventually snap. The selector lever then becomes detached from the actuator and, under adverse conditions, can slip off the pivot bolt and move freely inside the differential casing. The lever inevitably ends up caught between the bevel gears, causing catastrophic damage. A telltale warning sign is loss of four-wheel drive in reverse gear. If this is noticed, you should investigate the cause immediately.


Under unfortunate circumstances, the selector lever can become wedged in the final drive gearset with enough force to crack open the differential’s aluminium casing.
The freewheel lock actuators themselves, mounted on the rear of the differential casing, are generally very durable and reliable. Failures due to corrosion or wear are rather unusual. A well-known issue, however, is the small rubber grommet (009525642) that seals the interior of the actuator against the differential. This can tear, causing the vacuum at the actuator to suck gear oil out of the casing. This is a gradual process, but if left unnoticed, it will inevitably lead to the differential running low on oil. This fault can be identified, for example, by oil inside the vacuum reservoir. Malfunctions caused by reversed vacuum lines are also quite common. The vacuum source (brown) must be connected to the lower black port. The light-coloured port is for the breather and connects to the differential casing breather via a T-piece.





The sprags in the freewheel tend to break as they age. Although broken sprags cannot enter the main gear chamber due to being contained between the brass discs, the debris accumulates inside the freewheel unit. Over time, this leads to a total loss of engagement, causing the transfer of torque to the rear wheels to fail completely.
Other common issues
T4 rear differentials are very durable and robust when properly maintained. Typical defects occur around the drive pinion bearings, frequently caused by low oil levels or foreign debris in the casing. Common causes include oil loss from worn shaft seals or an incorrect oil fill level. When lifting a T4 Syncro, the differential is often dropped, altering the pinion angle at the expense of the front tapered roller bearings. On lowered differentials, it is therefore essential to fill more than the 1.0 L of gear oil specified by VW to ensure that all rolling bearings receive adequate lubrication. In practice, this can only be done properly with the differential removed, as oil will otherwise pour out of the filler opening before the required level is reached. Foreign particles can easily enter the casing, particularly on differentials with diff locks, via torn rubber grommets on the lock actuation linkage. Worn bearings in the differential typically present as whining or howling noises. A healthy differential produces no noise whatsoever in operation. Running noises should never be ignored: as wear progresses, tapered roller bearings can disintegrate, scattering rollers into the final drive gearset and causing catastrophic failure.


Ironically, corrosion has now become a serious concern for differentials with aluminium casings, whereas steel housings remain unaffected. The aluminium alloy used, AlSi9Cu3 (EN AC-46000), is commonly employed for thermally stressed components, but offers poor corrosion resistance.

Substantial galvanic corrosion damage develops over the years, particularly around steel brackets and attachments. On 02G differentials, this primarily affects the area beneath the actuator bracket plate, as well as the rear casing on units fitted to pick-up/dropside models (Pritschen). These use steel rather than aluminium brackets, which sit in direct contact with the casing alloy. Corrosion holes in the casing are unfortunately not uncommon here, leading to water and dirt ingress. In most cases, this permanently ruins the bearings and final drive gearset.








