Description
Reproduction mounting plate for the diff lock actuator made of powder-coated stainless steel, including new bolts. Suitable for the following rear differentials: DUA, DTZ.
Reference numbers
Bracket: 02G525653
M8 bolts: N10101603
M5 bolts: N0330212
From the factory, the diff lock actuators were mounted on galvanised plates with galvanised bolts, leading to two devastating consequences: if the plate begins to rust, the flaking rust expands and cracks the plastic housing of the actuator. The same applies to the countersunk bolts holding the actuator. Furthermore, the combination of two dissimilar metals (steel/aluminium) leads to severe corrosion damage on the differential housings. The powder-coated stainless steel mounting plate solves this issue: the base material does not rust, and the powder coating insulates the stainless steel from the aluminium housing. This effectively prevents galvanic corrosion on the aluminium housing. The countersunk bolts are also made of stainless steel, protecting the actuator’s plastic housing. The flanged bolts for mounting the plate onto the differential feature a zinc flake coating.
Replacing the mounting plate is highly recommended in any case, as the actuators have since become obsolete with no replacement available, making spares very difficult to source.










Reviews
There are no reviews yet.