Description
Complete drop kit for the T4 Syncro rear differential, suitable for all engine versions. Variant 2 is designed for higher suspension lifts from approx. 48 cm (measured from the wheel arch edge to the wheel centre).
When lifting the vehicle, the articulation angle of the rear driveshafts increases, which negatively impacts the service life of the CV joints. A joint that must compensate for a larger angle generates more heat, as the balls travel a greater distance within their races per wheel revolution. This leads to increased wear in the CV joints. It is essential to install the differential drop kit when lifting the T4 Syncro to reduce the driveshaft articulation angle to a sustainable level.
The differential drop kit variant 2 has been calculated to ensure the differential angle aligns with the rear propeller shaft segment. This results in only a minimal articulation angle at the rear flex disc (Hardy disc) (vibration damper), minimising wear on the coupling disc and centring bush. The scope of delivery includes the matching spacer plates as well as high-tensile flanged bolts of the correct length with a zinc flake coating for optimum corrosion protection. The spacers are made of aluminium and feature a high-quality black anodised finish. Please note: the bolts have different lengths. The two longer bolts must be fitted to the rear brackets.











Reviews
There are no reviews yet.