Driveshaft spacer rings 108 mm

196,90 €

Spacer rings in 11 mm width for driveshafts with 108 mm inner joints.

Delivery time: 2–4 working days

3 in stock

SKU: 20-1002 Category:

Description

Spacer rings for T4 Syncro driveshafts with 108 mm inner joints in 11 mm width. These spacer rings are required when a rear differential with 108 mm flanges (pre-facelift) is to be installed in a vehicle from 1996 onwards. This allows the original driveshafts to be used and compensates for the track width, which is 11 mm wider per side. Furthermore, it is possible to convert 02D series differentials from 100 mm to the old 108 mm flanges and install the old driveshafts (for which the spare parts situation is significantly better than for the newer rear driveshafts) in vehicles from 1996 onwards. Another application for these spacer rings is the installation of a Haldex differential with 108 mm flanged shafts in a post-facelift T4 Syncro using the old driveshaft version.

The scope of delivery includes 2x spacer rings and 12x high-tensile M10 bolts in the appropriate length to bolt the CV joints to the flanged shafts. The spacer rings should be mounted on the flanged shaft side with a surface sealant to protect the CV joint from moisture. The cork gaskets of the CV joints can still be used.

Additional information

Weight 1,658 kg

Product safety

Manufacturer information

allradbus – Martin Günther
Oststr. 1
99427 Weimar
Deutschland
info@allradbus.com
http://www.allradbus.com

Safety instructions

Installation only by competent persons or a specialist workshop. Observe the vehicle manufacturer's installation specifications and tightening torques. Check the part for damage before installation.

Reviews

There are no reviews yet.

Be the first to review “Driveshaft spacer rings 108 mm”

Your email address will not be published. Required fields are marked *